EV Charger Installations
EV CHARGER INSTALLATIONS IN CANTON, GA
The National Electrical Code treats EV charging as a continuous load, so the circuit must be rated at 125 percent of the charger's output, which means a 32-amp Level 2 charger needs a dedicated 40-amp circuit. TRU Lighting & Electrical Services provides EV charger installations in Canton, GA, putting Level 2 chargers on dedicated 240-volt circuits in garages, carports, and driveways. We inspect your panel, confirm capacity before installation, mount the charging unit, route conduit and wiring cleanly from the panel, and test every connection before the charger goes live. Our licensed and insured team can recommend a panel upgrade whenever your existing service needs more room.
A HOME CHARGER TURNS YOUR GARAGE INTO YOUR FUEL STATION.
Charging on a standard household outlet can take days to fill a large battery, which makes daily driving feel like careful rationing. A Level 2 charger changes that completely. Plug in when you get home, and the car is ready by morning, without detours to public stations, waiting in line, or paying higher per-kilowatt prices on the road every week.
We install each charger where it suits your parking layout and cable reach, on a circuit sized correctly for the unit and your panel, so charging is simple and safe.
✓ Level 2 chargers on 240-volt circuits
✓ Panel capacity checked before installation
✓ Clean conduit routing to the garage or driveway
✓ Every connection tested before first use
EV CHARGER INSTALLATIONS
CHARGING BUILT FOR NORTH GEORGIA COMMUTERS.
Many Canton drivers commute down Interstate 575 toward Woodstock, Marietta, and Atlanta, putting serious daily miles on their vehicles. That kind of routine is exactly where home charging shines. A properly installed Level 2 charger restores a typical day's driving overnight, so you leave every morning with the range you need, whether you drive to the office, run errands across Cherokee County, or head north toward the mountains.
MODERN GARAGES, OLDER PANELS, AND EVERYTHING IN BETWEEN.
Homes across Canton range from established neighborhoods with limited service to newer builds where the panel already feels crowded. Either can usually support an EV charger, but only after a careful capacity check. We evaluate your service size, existing loads, and available breaker spaces, then recommend the cleanest path, whether that means a simple dedicated circuit, load management, or a panel upgrade before installation.
NO CHARGER GOES LIVE UNTIL THE MATH CHECKS OUT.
EV chargers draw heavy current for hours at a time, which is exactly why shortcuts are dangerous. In 24 years of electrical work across North Georgia, we have learned to trust calculations over assumptions. We confirm panel capacity, size the breaker and conductors for continuous load, torque every termination, and test under charge before handing over a system that will run safely and quietly night after night for years.
WHAT A PROFESSIONAL EV CHARGER INSTALLATION DELIVERS.
Overnight Charging
A Level 2 charger adds range several times faster than a standard wall outlet, so plugging in after dinner means a comfortably full battery before your morning commute begins.
Lower Cost per Mile
Charging at home is typically far cheaper than using public fast chargers, and scheduling sessions for off-peak hours can stretch your savings further over a year of driving.
Safe, Dedicated Power
A dedicated circuit sized for continuous load prevents overheating and nuisance trips, and keeps the charger from interfering with appliances, lighting, or other equipment on your home's circuits.
Convenience Every Day
No more planning errands around public stations or waiting for an open charger. Your vehicle simply charges where it parks, ready whenever your schedule demands it.
Ready for a Second EV
Planning capacity and charger placement with the future in mind makes adding a second vehicle, or upgrading to a faster charger, far simpler and less expensive later.
A Tidy, Protected Installation
Neatly routed conduit and a securely mounted unit keep cables off the floor and protected from bumps, vehicles, and weather, giving your garage a clean, finished appearance.
our services
OUR EV CHARGER WORK.
A reliable charging setup depends on more than mounting a unit on the wall. These are the specific services we provide to get your electric vehicle charging safely and conveniently at home.
LEVEL 2
Level 2 Charger Installation
We mount your Level 2 charger at a convenient height and location for your parking layout, connect it to a dedicated 240-volt circuit, and configure it for the correct amperage for your vehicle and panel.
CAPACITY CHECK
Panel Capacity Evaluation
Before installation, we review your service size, existing loads, and open breaker spaces to confirm your panel can carry continuous charging safely, or clearly explain your options if it cannot.
NEW CIRCUIT
Dedicated Circuit Installation
A new branch circuit is run from the panel to the charger location, sized at 125 percent of the charger's rating, with the correct breaker and conductors for safe, continuous operation.
CLEAN ROUTING
Conduit and Wiring Runs
Wiring is routed in conduit along the cleanest practical path from panel to garage, driveway, or carport, protecting conductors from physical damage and keeping the finished installation neat and professional.
OUTDOOR CHARGING
Driveway and Carport Chargers
For homes without a garage, we install weather-rated chargers on exterior walls or posts near your parking spot, with protected wiring and careful placement that lets the cable reach comfortably.
FUTURE READY
Pre-Wiring for Future Vehicles
Ordering an EV, or planning a second one, is the perfect time to prepare. We install the circuit and outlet or charger location now, so you can start charging the day the car arrives.
THE WORD ON OUR WORK
WHAT OUR CLIENTS SAY.
New EV owners tell us the installation was faster and cleaner than they expected. They mention that we checked the panel carefully, explained the circuit in plain language, routed the conduit neatly, and had the charger working the same day. Several were charging their new car the night it arrived home.
FREQUENTLY ASKED QUESTIONS.
Home charging brings up questions about charger types, installation time, placement, and operating costs. These answers cover what Canton EV owners ask us most often before scheduling an installation.
What type of charger is installed during this service?
We install Level 2 chargers, which operate on 240-volt circuits and charge several times faster than a standard 120-volt outlet. Nearly every electric vehicle sold today is compatible with Level 2 charging using its standard connector or a manufacturer adapter.
How long does an EV charger installation take?
Most installations in Canton, GA, take a few hours, depending on the distance from your panel to the charger. TRU Lighting & Electrical Services will tell you upfront if a new circuit run or panel upgrade will extend that timeline.
Why does an EV charger need a dedicated circuit?
EV chargers draw a large, steady current for hours, which would overload a shared circuit. A dedicated circuit sized for continuous load keeps the charger operating safely without tripping breakers or affecting other appliances and lighting in the home.
Should I choose a hardwired charger or a plug-in model?
Hardwired chargers usually allow higher amperage and have no plug that can loosen or overheat over time, while plug-in units offer flexibility if you might move. We help you weigh charging speed, location, and future plans before choosing between them.
Where is the best place to mount a home charger?
The best location sits close to the vehicle's charging port when parked, within easy reach of the charger cable, and as close to the panel as practical. Shorter runs reduce installation time, while good placement prevents cables from crossing walkways.
When should I schedule an EV charger installation?
Schedule it after ordering your vehicle or while you are preparing for one. Installing before delivery means you can charge at home from the very first night, rather than relying on a slow household outlet or crowded public stations.
Can I charge two electric vehicles at home?
Yes, households with two electric vehicles can use two chargers on separate circuits or a load-sharing setup that splits available power between vehicles. The right approach depends on panel capacity, which we evaluate before recommending a dual-charging arrangement.
Why choose TRU Lighting & Electrical Services for an EV charger?
TRU Lighting & Electrical Services installs EV chargers in Canton, GA, with capacity checks first, correctly sized dedicated circuits, and clean conduit routing. We are licensed and insured, and we test every connection before your charger delivers its first session.
HOW WE WORK
FROM PANEL CHECK TO FIRST CHARGE, HERE IS HOW.
STEP 01
Discuss Your Vehicle and Parking Setup
We learn which vehicle you drive or plan to buy, where you park, how far you commute, and whether a second EV might follow, so the charger and circuit match your actual driving habits.
STEP 02
Evaluate Your Panel Capacity
Our electrician inspects the panel, reviews existing loads and available spaces, and confirms whether your service can support continuous charging or needs a dedicated upgrade or load management before any installation work begins at your home.
STEP 03
Choose the Charger Location
Together we select a mounting spot that suits your vehicle's charging port, cable length, and parking pattern, while keeping the conduit run from the panel as short, direct, and clean as reasonably possible.
STEP 04
Install the Circuit and Conduit
A dedicated circuit is installed in the panel with a correctly sized breaker, and conductors are routed in conduit to the charger location, secured neatly along walls or ceilings for lasting physical protection.
STEP 05
Mount and Connect the Charger
The charging unit is mounted securely at a comfortable height, connected to the new circuit, configured for the correct amperage, and checked against the manufacturer's installation requirements before power is restored to it.
STEP 06
Test and Start Your First Session
We test voltage, connections, and breaker operation, run a live charging session with your vehicle when available, and show you the charger's controls, indicators, and scheduling options so everything feels straightforward from the very first night.